Fiberglass Series Flagpoles

BETTER APPEARANCE THAN COMPETITORS: Our fiberglass flagpoles do not have mold marks. Most of our flagpole competitors have an unsightly mold mark running vertically the entire length of the flagpole. Our flagpoles are smoothly finished 360° around for the best appearance, and you don't have to pay extra for that!

THE BEST UV RESISTANT SURFACE: Our fiberglass poles have a new patented aliphatic polyurea coating. This ultrahard finish outperforms polyester-based gelcoat, used by our competitors. Our patented aliphatic polyurea coating is especially well suited for salt water conditions or extreme weather. Our poles will not corrode, pit or rust. They are extremely well suited for Southern Florida or intense UV conditions.

INCREDIBLY STRONG: Our innovative molding process produces a flagpole shaft with a tensile strength of 50,000 pounds per square inch. Inside a steel clam shell mold, layers of reinforced fiberglass roving, mixed with resin is aligned vertically for maximum strength and placed on a thick layer of aliphatic polyurea. An inflatable bladder is laid the entire length of the mold. The mold is closed, the bladder inflated, and the resulting pole is created by subtle pressure and slow curing during an exothermic chemical reaction.

CUSTOM COLORS: Our standard flagpoles have either a Brilliant White, Dark Bronze or Black pre-cast finish. Other colors are available upon request; please contact us for a prompt quotation or call us at (262) 783-4800.

EASIER TO INSTALL: Since fiberglass is a non-conductor, no grounding is required; thus, installation is easy and inexpensive.

EXTERNAL HALYARD STANDARD ACCESSORIES

• Gold anodized aluminum ball ornament
• Stationary truck on 15R thru 40X poles, Revolving truck on 50X thru 80X poles
• Solid braided polypropylene halyard
• 15R, 20R & 25R are supplied with nylon snaps, 20X thru 40X have Brass swivel snaps, and 50X thru 80X have Stainless Steel swivel snaps
• A nylon cleat with mounting screws is supplied on all models except 50X thru 80X which have aluminum cleats
• A flash collar is supplied on all models
• Fiberglass foundation sleeve

INTERNAL HALYARD STANDARD ACCESSORIES

• Gold anodized aluminum ball ornament
• Stationary truck on poles 20’ - 40’ poles, Revolving truck on 50’ and above
• Solid braided polypropylene halyard on 20' - 40' poles, S/S cable on 50' and above
• 15R, 20R & 25R are supplied with nylon snaps, 20X thru 40X have Brass swivel snaps, and 50X thru 80X have Stainless Steel swivel snaps
• Brass Swivel flag snaps on 20I thru 40I and Stainless Steel snaps on 50I thru 100I
• A flash collar is supplied on all models
• Fiberglass foundation sleeve